Metal-crosslinked polymer dispersion for the care of newly laid or thoroughly cleaned floor coverings. The slip resistance of the flooring is maintained by the matt care film. Suitable for care film renovation. Giscode: GE30. Available in sizes: 5l or 10l.
€120.00 / Pieceincl. VAT plus shipping costsDelivery time: approx. 1 week
Shake Secura Hard Sealer thoroughly before use. Then apply undiluted with the Wischwiesel or the Quick Step in an even thin film to the bulking or primed surface of the flooring in the longitudinal direction. If the care film is resistant to foot traffic, repeat the process in the transverse direction. Allow film to dry for at least 12 hours, or more suitably overnight, before using the covering.
Notes & Consumption:
Notes: When applying, avoid strong sunlight and drafts, turn off underfloor heating beforehand. In porous older linoleum coverings, which have been leached out by the use of strongly alkaline cleaning products, powdering of the coating may occur in individual cases. Prolonged exposure to stagnant road salt water may cause whitish discoloration on the polymer sealant. These discolorations are largely due to the formation of salt crusts and can usually be removed with Active Cleaner R 280.
Consumption: 25-30 g/sqm per application
Technical data: pH value: approx. 8.5 (concentrate)
Ingredients: Less than 5% non-ionic surfactants. Contains BENZISOTHIAZOLINONE, METHYLISOTHIAZOLINONE, fragrances, LIMONENE, solvents, care components.
Giscode: GE 30 (product code for cleaning and care products).
Store Secura Hard Sealer in closed original container in a cool and dry place, protected from frost. Store under lock and key and out of reach of children.
Floor coverings made of PVC, CV, linoleum. Application on polyolefin, rubber and stone floors is possible depending on the object and must be checked beforehand. Follow the care instructions specific to the floor covering.